The conservative machining methods used on iron alloys may perhaps be used for these ASME SA 234 WP22 End Cap Pipe Fittings, which has some exceptional features to offer such as resilient to corrosion, exact dimensions, free from slightly form of maintenance, and consequently on. Though the grade can be cold worked or tempered to upsurge its features, SA 234 WP11 Dish Cap is delivered in the annealed form as standard.
-
Call us anytime
+91 77000 66688
-
Opening time
Mon - Sat 10.00 to 07.00
-
Email us now
sales@versatileoverseas.com
Alloy Steel ASTM A234 WP11 Pipe Fittings
Alloy Steel ASTM A234 WP11 Pipe Fittings
Largest Stockholder of Chrome Moly WP11 Pipe Fittings in India, ASTM A234 WP11 Stub End Trader, Ready Stock of ASME B16.9 Alloy Steel WP11 Pipe Elbow, CrMo WP11 Equal Tee, Competitive Price of CrMo WP11 SR Elbow, ASTM A234 WP11 Buttweld Fittings Manufacturers in Mumbai, India.
Table of Contents
- About ASTM A234 WP11 Buttweld Pipe Fittings Manufacturer
- Manufacturing Standards of Chrome Moly WP11 Pipe Fittings
- Stock Availability of A234 WP11 Pipe Fittings
- ASTM A234 WP11 Pipe Fitting Classes for WP Grades
- Price List of ANSI B16.9 Alloy Steel Buttweld Pipe Fittings
- ASTM A234 WP11 Buttweld Fittings Properties
- Chrome Moly Steel A234 WP11 Elbow Ready stock in India
- ASTM A234 WP11 Reducer Applications and Uses
- Chromium Molybdenum Steel WP11 Buttweld Elbow
- Chrome Moly Steel A234 WP11 Buttweld Tee
- Chrome Moly WP11 Buttweld Pipe Cap
- Alloy Steel A234 WP11 Buttweld Pipe Bend
- Alloy Steel WP11 Buttweld Cross
- Chromium Molybdenum WP11 Buttweld Reducer
- Chromium Molybdenum WP11 Buttweld Lateral Tee
- A234 WP11 Buttweld Fittings Specification
- Chrome Moly Steel WP11 Buttweld Stub End
- Alloy Steel WP11 Buttweld Pipe Nipple
WP11 Buttweld Pipe Bend, ASME SA234 WP11 Collar Pipe Fittings, Alloy Steel WP11 45 Deg Elbow, WP11 CrMo End Cap, Buy ASTM A234 WP11 180 Deg Elbow, CrMo WP11 Two Joint Pipe Fittings, A234 WP11 Buttweld Cross Wholesaler, Grade A234 WP11 Eccentric Reducer Dealer, A234 WP11 Long Stub End Supplier in Mumbai, India.
Versatile Overseas is a known supplier of AS A234 WP11 Pipe Fittings, which has about three times the yield power and two times the tensile power. These Alloy Steel A234 WP11 U-Bend Pipe Fittings are bringing about by a group of accomplished specialists that makes it a point to use cutting-edge equipment and machines in the manufacturing procedure.
We have arisen as a leading manufacturer, trader and supplier of a widespread variety of these Alloy Steel A234 WP11 180-Degree Elbow Pipe Fittings, which has outstanding corrosion resistance together by means of increased hardness and strength. Our skilled specialists make use of outstanding quality of ASTM A234 Alloy Steel WP11 Stub End Pipe Fittings in the production procedure. Alloy Steel A234 WP11 Short Stub End Pipe Fittings is a precipitation hardenable and nickel-copper alloy, through accompaniments of titanium and aluminium. Typical uses for Alloy Steel A234 WP11 Long Stub End Pipe Fittings are impellers and pump shafts; scrapers and doctor blades; instruments and oil-well drill collars; electronic parts; valve trim and springs.
Specification of Alloy Steel A234 WP11 Buttweld Fittings
| WP11 Pipe Fittings Specifications | ASTM A234/ ASME SA234 |
|---|---|
| WP11 CrMo Pipe Fittings size | WP11 Seamless Butt Weld Fittings : 1/2" - 10" WP11 Welded Butt Weld Fittings : 1/2" - 48" |
| CrMo WP11 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| ASTM A234 WP11 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A234 Grade WP11 Pipe Fitting |
| Alloy Steel WP11 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| A234 WP11 Buttweld Pipe FittingsType | DN15-DN1200 |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A234 WP11 Buttweld Fitting |
| ASTM A234 WP11 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| WP11 Chrome Moly Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 234 WP11 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | CrMo WP11, 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
CrMo WP11 Concentric Reducer, A234 WP11 Long Radius Elbow, ASTM A234 WP11 Short Radius Elbow, Alloy Steel WP11 Stub End, Alloy Steel WP11 Tee, A234 WP11 Piggable Bend Supplier in India
Alloy Steel A234 WP11 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | P | Cr | Mo |
| A234 WP11 | 0.05-0.2 | 0.3-0.8 | 0.5-1 | ≤0.03 | ≤0.03 | 1-1.5 | 1-1.5 |
Alloy Steel A234 WP11 Pipe Fittings Mechanical Properties
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| A234 WP11 | 415 - 585 | ≥205 | ≥20 |
Alloy Steel A234 WP11 Pipe Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Alloy Steel A234 WP11 Pipe Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 900 Elbow | 450 Elbow | Equal tee | 900 Elbow | 450 Elbow | Equal tee | 900 Elbow | 450 Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Alloy Steel WP11 Pipe Fittings Other Available Products
| Chrome Moly Steel WP11 90° LR Elbow | WP11 Cr-Mo Buttweld Elbow |
| A234 WP11 90° Weldable SR Elbow | CrMo WP11 Pipe Reducers |
| ASME B16.9 Alloy WP11 90° Reducing Elbow | A234 WP11 Butt weld Unequal Tees |
| MSS SP-43 Chrome Moly WP11 Stub End | ASTM A234 WP11 Caps |
| A234 WP11 Buttweld Two Joint Cross Supplier | ANSI B16.9 WP11 Butt weld Tee |
| ASTM A234 WP11 Reducing Tee | ASTM A234 WP11 Lateral Tee Supplier |
| Sch 10 Chrome Moly WP11 Concentric Reducer | WP11 Buttweld Reducer Dealer |
| Sch 80 Alloy Steel WP11 Eccentric Reducer | A234 Grade WP11 Long Radius Bends |
| ANSI B16.9 WP11 Pipe Cap | WP11 Chrome Moly Weldable 3D Elbow |
| WP11 Cr-Mo 180 Deg Buttweld Elbow | ASTM A234 WP11 Lap Joint Stub Ends Stockists |
| Gr WP11 45° Long Radius Elbow | Grade WP11 CrMo Short Radius Elbow Exporter |
| A234 Grade WP11 Pipe Bends | ASTM A234 WP11 Alloy Steel Pipe Elbow |
| A234 WP11 CrMo 180° LR Return Bend | WP11 CrMo Seamless Reducing Tee |
| ASTM A234 WP11 Pipe Nipple | A234 WP11 Seamless Lateral Tee |
| A234 WP11 Weldable 1.5D Elbow | CrMo WP11 Pipe Reducers |
| Alloy Steel WP11 Stub End Exporter | 1 Inch Alloy Steel WP11 Buttweld Pipe Fittings |
| 6 Inch CrMo WP11 Buttweld Pipe Fittings | A234 WP11 Chrome Moly Reducing Nipple |
| MSS SP-43 Chrome Moly WP11 Stub End | Sch 80 Chrome Moly WP11 Pipe Fittings |
| ASTM A234 Alloy Steel WP11 Eccentric Reducer | ASME B16.9 Chromium Molybdenum Steel 10D Elbow |
| Chromium Molybdenum Two Joint Pipe Fittings | A234 WP11 Alloy Steel LR Elbow Supplier |
| Cr-Mo WP11 45 Degree Elbow | ASTM A234 WP11 Tee |
| Alloy Steel 90° Seamless Elbow Dealer | ASTM A234 WP11 LR Elbow Stockist |
| Chrome Moly WP11 Long Radius Elbow Supplier in Mumbai | ASTM A234 WP11 180 deg LR Elbow Manufacturer in India |
| A234 WP11 Pipe Fittings Dimensions | Alloy Steel A234 WP11 Buttweld Reducing Nipple |
| Wrought Austenitic Chrome Moly A234 WP11 Pipe Fittings | ASTM A234 WP11 Eccentric Reducer at Best Price |
| Alloy Steel Equal Cross Supplier | Suppliers of WP11 Chromium Molybdenum End Pipe Cap |
Alloy Pipe Fittings
